Vertical Shaft Crusher Working Principle

Ugurmak series DM1100 Vertical Shaft Crusher; It is one of the advantageous and low-cost crushers that can be used in sand quarries, quarries, ready-mixed concrete and mining sectors. They are crushers with high sand ratio and cubicity, which are produced as an alternative to cone crushersand are used to obtain 0-5 mm sand by crushing all kinds of hard or abrasive materials such as medium-sized basalt and granite.

The crushing process takes place when the material fed by the feed chamber of the crusher is thrown into the stone lining in the crushing chamber at high speed by means of a rotor rotating at high speed. Due to the crushing process of the crusher by hitting the stone with the stone, the consumption of spare parts is very low. One of the products with different features of UGURMAK, which is one of the important names in crushing and screening, is the DM 1100 product.

While the feeding size of the existing machines is 45 mm, the feeding size of the DM 1100 has been increased to 90 mm and maximum efficiency has been achieved. In the crushing and screening sector, it is necessary to pass the stone through 3 different crushers in order to reduce it below 20 mm. The number of crushers was reduced to two by using the DM 1100 crusher. This reduces energy and cost. Optimum material was used for the rotor part by using a simulation program and static analysis. A wear-resistant and durable amyl wall is designed, to which the stone thrown to break is hit. Thanks to this wall, the breakage rate was increased by 15%. In order to increase the life of the machine and prevent malfunctions, the bearing lubrication system will be electronically controlled and automatically lubricated. Special forged steels and diamond tips are used to increase the life of the surfaces where stones are thrown with the rotor.